Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Sorption of radionuclides on inorganic sorbents

Inorganic sorbents are often used in separation of metals and radionuclides in radioanalytical application and they were also used in technological scale for separation of radionuclides in cleanup of Three Mile Island NPP. Inorganic sorbents become popular in the last years because no problem with organic contamination, there are stable against radiation, sorption efficiency can be tailor made for selective separation of chosen metal. Contrary to the organic sorbents they have usually lower capacity and chemical stability is limited to narrower pH. Nevertheless of some problems, many good properties of inorganic sorbents make them very attractive for sorption study.     

Correlation between Lipophilicity of the Ligands and the Hepatobiliary Properties of the Radiopharmaceuticals: Approach to the Development of New IDA Derivatives

The partition coefficient (log P) for n-octanol/water system was calculated applying PACO program for various theoretically possible mono and dihalogenated IDA derivatives. Some of the synthesized ligands (SOLCOIODIDA, IODIDA and DIIODIDA) were labeled with the technetium-99m. The biodistribution and influence of bilirubin on their biokinetics were investigated in rats. The correlation between partition coefficients of ligands increase (log P) and better hepatobiliary properties of ^99mTc-IDA derivatives was determined. The values of log P increase from 1.16 for SOLCOIODIDA, 3.11 for IODIDA to 3.47 for DIIODIDA. In correlation with these results, biliary excretion decreased for 59% for ^99mTc-SOLCOIODIDA and 11% for ^99mTc-IODIDA and ^99mTc-DIIODIDA under hyperbilirubinemia (3.5 min after injection) and 45%, 11% and 0.38% respectively (15 min after injection). The highest biliary excretion had ^99mTc-DIIODIDA (55.4% for 3.5 min). Considering the correlation between hepatobiliary properties and log P, the evaluation of biological properties for various trifluoromethyl mono and dihalogenated IDA derivatives was performed on the basis of the calculated log P in order to synthetize a new radiopharmaceutical for hepatobiliary scintigraphy.     

Coulometrische Wismutometrie

Zusammenfassung Durch elektrolytische Oxydation einer Bi-Anode in gesättigter NaCl-Lösung können Bi³⁺-Ionen in Lösung gebracht werden. Dieser Prozeß ermöglicht die coulometrische Bestimmung anwesender Anionen, die schwerlösliche Bi-Verbindungen bilden.Es wurden Semimikro- und Mikrobestimmungen von Phosphationen durch elektrolytisch erzeugte Bi³⁺-Ionen bei konstanter Stromstärke ausgeführt. Die Endpunktbestimmung erfolgte amperometrisch bei konstantem Potential mit einer Indikatorelektrode — tropfende Quecksilberelektrode — und mit einer gesättigten Kalomelelektrode als Bezugselektrode. Die coulometrische Wismutometrie bietet eine weitere Möglichkeit der coulometrischen Eichung volumetrischer Lösungen im Sinne des seinerzeitigen Vorschlags vonTutundi.

---

Summary Bi³⁺ ions can be brought into solution through electrolytic oxidation of a Bi-anode in saturated NaCl solution. This process makes possible the coulometric determination of the anions present that yield difficulty soluble bismuth compounds.Semimicro- and micro-determinations of phosphate ions were made via Bi³⁺-ions produced electrolytically at constant current strength. The endpoint was determined amperometrically at constant potential with an indicator electrode-dropping mercury electrode-and with a saturated calomel electrode as reference electrode. The coulometric bismuthometry affords a further possibility of the coulometric standardization of volumetric solutions in the sense of the proposal previously advanced byTutundi.

---

Résumé On peut utiliser les ions Bi³⁺ en solution par oxydation électrolytique d'une anode en bismuth, en solution de chlorure de sodium saturée. Ce procédé permet le dosage coulométrique des anions présents qui forment des composés peu solubles avec le bismuth.On a mis au point le dosage semimicro et micro des ions phosphates par les ions Bi³⁺ formés électrolytiquement sous intensité constante. On détermine par ampérométrie le point équivalent à potentiel constant à l'aide d'une électrode indicatrice — électrode de mercure à goutte pendante —et avec une électrode au calomel saturée comme électrode de référence. La «bismuthométrie» coulométrique offre de grandes possibilités pour l'étalonnage coulométrique de solutions volumétriques, suivant l'idée queTutundi a émise en son temps.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.

---

Wir danken Herrn Dipl.-Ing.Vladimir Pantovi für seine Hilfe bei unserer experimentellen Arbeit.     

Polymorphism and stability of norfloxacin, (1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinil)-3-quinolinocarboxylic acid

Norfloxacin was studied by thermal methods (TG and DSC), X-ray powder diffraction, and by FT-IR, UV-VIS and NMR spectroscopy. The drug substance can be prepared in two different crystalline forms and in amorphous state, depending on the experimental conditions of preparation. DSC examinations were carried out at various heating rates and by cycling the samples in the temperature range 50°–250°C. The unstable crystalline form undergoes two irreversible solid-solid phase transitions at 176.5° and 197.6°C. The polymorph melts in the temperature range 218.5°–220.0°C.

---

Zusammenfassung Norfloxacin wurde mittels thermischer Methoden (TG und DSC), weiterhin mittels der Debye-Scherrer-Methode und FTIR-, UV-VIS-und NMR-Spektroskopie untersucht. Je nach den experimentellen Bedingungen bei der Herstellung kann die Wirkstoffsubstanz in zwei verschiedenen kristallinen und in einer amorphen Form hergestellt werden. Die DSC-Untersuchungen wurden bei zahlreichen Aufheizgeschwindigkeiten und durch abwechselnden Temperaturwechsel zwischen Raum- und Schmelztemperatur durchgeführt. Die unstabile kristalline Form unterliegt zwei irreversiblen Feststoff-Feststoff-Umwandlungen bei 176.5° und bei 195.6°C. Das polymorphe Material schmilzt im Temperaturbereich 218.5°–220.0°C.

     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Stereochemistry of cyclic ether formation—II : Intramolecular cyclisation of secondary aliphatic alcohols to tetrahydrofuran-type ethers

The mechanism and stereochemistry of δ-C atom functionalisation in the reactions of secondary straight-chain aliphatic alcohols with lead tetraacetate, ceric ammonium nitrate, and heavy metal (Pb⁴⁺, Hg²⁺, Ag⁺) salts (AcO)^?1, O^2?, CO₃^2?-halogen (I₂, Br₂, Cl₂) combinations are discussed. By demonstrating the intermediacy of 5-bromo-2-hexanol, it was confirmed that the dark silver oxidebromine induced cyclisation of 2-hexanol (and alcohols in general) involves (as the other hypohalite reactions) intramolecular 1,5-hydrogen abstraction by alkoxy radicals and formation of δ-bromohydrins. A novel and simple procedure for obtaining tetrahydrofurans from alcohols by way of the hypochlorite reaction, using silver or mercuric salts and chlorine, is described.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Interactions of proteins with uniform colloidal hematite and chromium hydroxide particles. I. Adsorption

The adsorption of ovalbumin, -globulin, and lysozyme on uniform spherical hematite and chromium hydroxide particles in aqueous media has been studied as a function of the pH at a constant ionic strength. The uptake of ovalbumin and -globulin was greatest at their isoelectric points and differed little at 10^–2 and 10^–3 mol dm^–3 NaNO₃. The adsorption of lysozyme was strongly influenced by the ionic strength.The deposition of ovalbumin on hematite in the presence of Mg (NO₃)₂ was significantly greater than that with NaNO₃ under otherwise comparable conditions. Dialysis experiments with ovalbumin against magnesium nitrate solutions showed Mg²⁺ to be specifically bound to the protein.The shapes of isotherms indicated monolayer coverage for ovalbumin and multilayer coating for lysozyme for both adsorbents. The shapes of isotherms of -globulin on hematite point to a rearrangement of the protein on the particle surface, while a monolayer was found on chromium hydroxide particles.Supported by the NSF Grant CHE-9108420Part of a Ph.D. thesis     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).